Picking shoes depends on how soft and hard your feet are

Choose shoes

[This site - shoes and life] According to reports, the United States New York City foot specialist Dr. Dennis Shafferson said that the foot is also divided into different "type", to figure out their feet, in order to choose the right shoes.

1. Front soft and hard type

This is the most common foot type, with large heel support and good damping effect in the forefoot. This kind of foot type is easy to have heel pain, big elbows and elders are easy under the two toes. The shoes with narrow heel and wide forefoot should be chosen.

2. Front soft soft type

This type of foot cushioning works well, but its support to the body is relatively weak. If the weight is too high, it will easily lead to flat feet. If the inner side of the heel is worn badly, the medial side of the arches tends to bulge and cause the arch to collapse irreversibly. Excessive feet can lead to impaired ankle strength, increased knee wear, and weakness in the ankle. Back depression. It is recommended that this type of person choose shoes with an arch support Pad inside the shoe and should receive corrective treatment if necessary.

3. After the hard front hard type

This type of foot is characterized by a high arch and it is hardly deformed even if the foot is stressed. The natural tightening of the foot bones and ligaments results in better support but poor shock absorption. As a result, the pressure on the knees, hips, and lower back is increased, which can easily lead to arthritis, tendonitis, and sprained ankles. The toes are prone to calluses. This type of foot is best to choose shoes with higher uppers and wider forefoot. The best choice for insoles and soles is soft and elastic. You should usually do more stretching exercise to help ease the tension of the foot muscles.

4. After the stable stable

This type of foot is the most stable and closest to the "normal foot". Heel wear is usually slightly greater than toe wear. However, this type of foot is not a problem. If the shoes are too tight or the toes are too low to be long eyes, wear pointed shoes and high heels as much as possible.

5. After the flat front flat

This type of foot is difficult to withstand long-term loads. Otherwise foot pressure will be uploaded to the ankles, knees, thighs, ankles and waist. The soles of the feet are susceptible to elder, corn, and cramps. When these people buy shoes, it is best to choose a thick bottom, cushion soft, relatively loose. When exercising, it is best to go for a swim or bike ride and try to avoid running on a hard surface.

  • · The old shoes at home are like this to transform big spikes
  • · Old shoes don't stupidly throw away so that the shoes "open"
  • Put a physical insurance on your shoes
  • · How to clean the matte surface of the shoes?
  • · Breathable, antibacterial, deodorizing socks with it to avoid off shoes
  • ·Sports shoes's little tail actually has these 3 functions you certainly don't
  • ·High-heeled shoes audio sound? 4 coups to ease you learn a few
  • ·How to choose shoes during pregnancy? Flat shoes are not safe
  • What should I do if my shoes become moldy
  • ·Wearing these shoes in the summer will hurt you
  • Air Slide Belt

    1.Description

    Air slide Fabric is also named as air slide Belt, conveyor belt, canvas cloth etc. It is woven by Polyester yarn with durable and abrasion resistant,in 2-5 ply.  Fix the air slide belt between material (above) and airflow box(below), air flow cross the material and make the powder or particle fluidized under gas pressure, to achieve the purpose of conveying.

    air slide belt

    2. Specification

    Type

    Material

    Ply

    Tensile Strength

    Heat resistance°C

    Thickness

    Weight/m2

    Max Width

    Air resistance in

    2m3/m2/minH2O mm

    Warp>N/mm

    Weft>N/mm

    AP4-4

    100%Polyester

    4

    360

    270

    150

    4

    3200g 

    2000mm 

    Type A;80-120

    Type B:120-150

    Type C:150-200

    AP4-5

    100%Polyester

    4

    360

    270

    150

    5

    3600g

    2000mm

    Type A;80-120

    Type B:120-150

    Type C:150-200

    AP4-6

    100%Polyester

    4

    360

    270

    150

    6

    4000g

    2000mm

    Type A;80-120

    Type B:120-150

    Type C:150-200

    AP4-7

    100%Polyester

    4

    360

    270

    150

    7

    4400g

    2000mm

    Type A;80-120

    Type B:120-150

    Type C:150-200

    AP4-8

    100%Polyester

    4

    360

    270

     

    150

    8

    4800g

    2000mm

    Type A;80-120

    Type B:120-150

    Type C:150-200

    AC4-5

    100%Cotton

    4

    150

    100

    150

    5

    3800g

    2000mm

    Type A;80-120

    Type B:120-150

    Type C:150-200


    3.Product attributes

    Product range:3mm-10mm

    Temperature resistant:160

    Permeability (10-3m3/m2.S):0.5-10

    Width:max 2600mm

     

    4.Features:

    1. Constant air permeability

    2. High abrasion resistance

    3. High tensile strength in warp & weft

    4. High resistance to wear & degradation

    5. Readily cut heat scalable so ease in fitting

    6. Resistance to decay and rot prevents the formation of bacteria and fungus

     

    5.Applications: 

    1. Cement industry:cement bulk cement trucks,boats;

    2. Mining:alumina,lime,fly ash,phosphate;

    3. Chemical industry:soda;

    4. Power:fly ash,desulfurization;

    5. Food industry:flour

    Air Slide Belt

    Air Slide Belt,Air Slide Fabric,Polyester Air Slide Fabric,Polyester Air Slide Belt

    HUATAO INDUSTRIAL FELTS CO., LTD. , https://www.industrial-felts.com

    Posted on