Today's sewing machines have the function of sewing eyelets, but sometimes only one or two buttonholes have to be disassembled and the pressure foot debugging and debugging, not as hand-sewn casual and convenient. Moreover, hand-stitched buttonholes are more refined than ordinary household sewing machines.
Production Method:
1. Different from the machine sewing, the hand sewing buttonhole first cuts the back seam, first cuts the buttonhole to the required width, and then starts sewing the first stitch by hand stitch, you can choose the starting position at will, but note that the stitching cannot be too long. Otherwise it will be difficult to see, the length of the pin is maintained at about 0.2 cm. Pull the needle out to tighten the thread.
2. Next, thread the needle thread around the buttonhole counterclockwise, and then sew the second stitch. The distance between the second stitch and the first stitch is also about 0.2 centimeters, and also keep the same length as the first stitch.
3. Tighten the thread. Then just repeat the second step and stitch along the edge of the buttonhole.
4. When sewing to the corners, it should be sewn into a fan type as shown in the figure. This will make the outer edge of the buttonhole form an elliptical shape, which is quite beautiful.
5. At the end of the sewing process, you will find that the stitches on the first stitch are slanted, which is not good-looking. At this time, you just need to insert the needle into the first needle to hook it. The purpose is to make the first needle also perpendicular to the buttonhole edge and form a connection with the last needle. After doing so, the buttonhole can not see where Where did the beginning begin?
6. Finally, wear the needle from the buttonhole to the opposite side. Sew a needle on the fabric next to the reverse buttonhole (the stitches must not be exposed on the front side). Then cut off the knot.
Want to learn more about buttons: Visit http://
SHAOXING WUYUN TEXTILE CO.,LTD , https://www.kexintextile.com