Chemical Name: Polypropylene
English name: Polypropylene (referred to as PP)
Specific gravity: 0.9-0.91 g/cm3
Molding shrinkage: 1.0-2.5%
Molding temperature: 160-220°C
Features: Small density, strength and stiffness, hardness and heat resistance are all better than low-pressure polyethylene, can be used in about 100 degrees. Good electrical properties and high frequency insulation are not affected by humidity, but brittle at low temperatures, not wear , easy to aging. Suitable for the production of general mechanical parts, corrosion-resistant parts and insulation parts.
Molding characteristics:
1. Crystalline material, low hygroscopicity, prone to melt fracture, long-term contact with hot metal easy to decompose.
2. The fluidity is good, but the shrinkage range and the shrinkage value are large, and the shrinkage holes, dents and deformations are easy to occur.
3. Cooling speed, pouring system and cooling system should be slowly cooling, and pay attention to control the molding temperature. Material temperature easy to orientate at low temperature and high pressure, the mold temperature is lower than 50 degrees, the plastic parts are not smooth, easy to produce poor welding, flow marks, More than 90 degrees warp deformation.
4. The plastic wall thickness must be uniform to avoid lack of glue and sharp corners to prevent stress concentration.
Tops For Women,Graphic Tees For Women,Ladies Long Tops,Tunic Tops For Women
SHAOXING NEWIDEA GARMENT CO.,LTD , https://www.shouyaoapparel.com